TDRL-100C Update Cable Fault Prelocator

TDRL-100C Cable Fault Prelocator

 SPECIFICATION: 

Working mode: low voltage pulse(TDR)

Signal gain adjustment range: 45 dB.

Low voltage pulse emission voltage: 30V. 

Measurement error: ± (0.5%×L+ 1M),L≥20m

Low pressure pulse pulse width: 10ns~@3V；20ns~10us@30v 

Highest resolution: 0.1m. 

Maximum sampling frequency: 200MHz real-time sampling. 

Maximum ranging range: 100km.

Wave speed setting range: 100m/ US ~300m/us 

 Output impedance: 25, 50, 75, 100, 125, 150, 175Ω + differential, automatic matching.

 Maximum sampling frequency: 200MHz real-time sampling

 Ranging blind area:2M. 

 Number of waveform saved: 100 pieces. 

 Power supply: lithium-ion battery pack, nominal voltage 7.4V,6000mAh. 

 Battery power supply time: Use a fully charged polymer lithium ion battery, can last for more than 10 hours (with the battery aging, continuous service time will be reduced). 

 Communication interface: USB, Bluetooth (optional). 

 Power supply: lithium-ion battery pack, nominal voltage 3.7V,6000mAh. 

 Battery power supply time: Use a fully charged polymer lithium-ion battery, which can be used for more than 10 hours continuously (with the aging of the battery, the continuous use time will be shortened accordingly). 

 Volume: 226×56×130 mm

 Quality: host unit 1.0 kg

 Conditions of use Temperature: -10℃ ~ +40℃Humidity: 5% ~ 90% RH (25℃) Altitude: H <4500m