WHATAPP
+86-13072088960

PCLC-901D Cable Fault Distance Prelocator

PRODUCT > Cable Fault Testing system > PCLC-901D Cable Fault Distance Prelocator

PCLC-901D Cable Fault Distance Prelocator

PCLC-901D CABLE FAULT LOCATOR
*FAULT PRE-LOCATING DEVICE
shared:

1. GENERAL DESCRIPTION

1.1 GENERAL :

The PCLC-901D Power Cable Fault Pre-locator is an easy operation device used for distance locating . It’s easy to operate,support both touch screen/button operation and with friendly interface.

PCLC-901D can be used alone under the low voltage impulse mode.

Under the mode of impulse current,PCLC-901D needs to work with HVSG-500GX high voltage generator items.Under the multiple impulse mode,PCLC-901D also need PCLC-900C coupler.After distance locating,user could use PCLD-901PX items for fault pinpointing. And these products can be combined into a set of high performance and innovative cable fault testing system.


1.2 FUNCTION FEATHER:

Multiple distance locating method:

-Low current impulse method: apply to the locating of the low resistance fault. Short circuit fault, open circuit fault. It also can be used in the measurement of the cable length, the intermediate joints, T joints, and cable termination joint. This method also can be used to correct the wave velocity.

-Impulse current method: apply to the high resistance fault, breakdown fault. Use the current coupler to gather signal from the earth wire  

-Multiple impulse method: improvement of the SIM method

200MHz real-time sampling

-Advance tech.Upgrading for SIM method

-Max. 0.4m measurement resolution,PCLC-901D has small blind zone and is special for the short cable and nearly-terminal fault cable

Touch screen and press key operation

-Touch operating screen with smart gesture operation

-Support cursor drag-drop function and double-click function,easy to locate

-Simple function menus with high performance.

Big color LED screen, friendly interface

-Simple function menus with high performance

7" LED screen,160°viewing angle,bright with 750cd/m2 to view under sunshine

-PIP copy(pic. temporary storage). There'll be a main window and three temporary storage windows could check three waveform together.

Waveform storage and PC communication

-Special software management for software upgrade, backup and restore in device.

-Waveform storage and communication with computer.

-Internal storage of waveform.

-Optional mini printer for waveform printing

-Support connection with PC or laptop

Power management

-Back light weakens if no operation in 2 min and power off in 10 min. if no operation.

-Built-in Polymer Lithium-ion battery.

-Working time could reach 7 hours for each use.

 


Name
Phone
Email
Corporate name
Address
Leaving Message*
 
Verification code
Submit