WHATAPP
+86-13072088960

GW-2160C Multi Frequency Locator/Receiver

PRODUCT > Cable Fault Testing system > GW-2160C Multi Frequency Locator/Receiver

GW-2160C Multi Frequency Locator/Receiver

Both the transmitter and the receiver are equipped with a large capacity lithium battery pack. A fully recharge can last a whole working day outdoors. The recharging function has greatly reduced the detection costs.
shared:

 

1. Multiple Functions
1) Transmitter: three connection modes: inductive connection, direct connection and clamp connection;
suitable for different occasions.
2) The receiver functions: detecting the position,path, depth and tube current of underground pipes and
cables.
3) Left and right positioning arrows indicate the target pipeline position fast and accurately; front and rear
arrows and dB value indicates the point and size of the coating damage.
4) Backlight suitable for urgent use in the nighttime.
5) Optional GPS geolocation with the automatic mapping of the pipelines.
6) Optional professional data analysis software with the automatic detection report.
7) Unique feature of GW-6000GE: locating the breakdown points (pipeline breakdowns refer to the coating
damaged points while electric cable breakdowns refer to the outer layer damages.); detecting the insulation
damages of underground pipeline and cable.
8) Measuring the current of the pipeline and cable applied by the transmitter.
9) Multimeter function: measure the output voltage, line voltage, line current, impedance and power; Test
the cable continuity and insulation quality before and after cable fault finding.
10) External induction clamp: suitable for testing the cable when they cannot be directly applied to the
signal of the place.

2. High Location Accuracy
A variety of measurement modes for pipeline positioning (valley mode, peak mode, broad peak mode, peak
arrow mode), can verify each other to ensure the accuracy of pipeline positioning.
1) Maximum value method: peak mode, broad peak mode and peak arrow mode are available to
determine the horizontal component (
) or horizontal gradient (
) changes, according to its
maximum position to locate;
2) Minimum value method: use the valley mode by measuring the vertical component (
) changes
according to its minimum position to locate.

3. Measuring the depth
A variety of methods can be used to verify each other.
1) double-level coil direct reading method;
2) single-level coil 80% method, 50% method;
3) 45 degrees method

4. Strong anti-interference ability
1) Many Observation Parameters: can measure horizontal component (
), vertical
component (
) and horizontal gradient (
).
2) Large transmission power: the transmitter output power reaches 10W and it could be
continuously adjustable.
3) Multiple Working Frequency:
Transmitter frequency: 128Hz, 512Hz, 1KHz, 2KHz, 8KHz, 33KHz, 65KHz, 83KHz.
Receiver frequency: radio, 50Hz, 100Hz, 128Hz, 512Hz, 1KHz, 2KHz, 8KHz, 33KHz, 65KHz,
83KHz.
According to the target pipeline features (material, structure, depth, length, etc.) and the
environment to select the appropriate operating frequency.

5. Easy Operation
1) Intuitive: use the graphical display to get the sustained and real-time display of various
parameters in the detection process and signal strength.
2) Automatic: in the depth measurement, automatic change to the two-level antenna mode
and automatic adjustment of the receiver sensitivity so that the measurement signal achieves
the best result. The mode returns to the original one after the depth measurement.

6. Long continuous working time with the low cost
Both the transmitter and the receiver are equipped with a large capacity lithium battery pack.
A fully recharge can last a whole working day outdoors. The recharging function has greatly
reduced the detection costs.

7.AC and DC
Under normal circumstances, if the battery is sufficient, please use the instrument with
built-in battery pack power supply. If the battery power is low, and the detection task is not
completed, you can use the power adapter to continue the detection without having to recharge
the battery.

 

Name
Phone
Email
Corporate name
Address
Leaving Message*
 
Verification code
Submit